Skip to content
Voron Mods
Menu
  • V0.2

V0 Magnetic Panels

by yeri

v1 · source 8e5067f · 5 files

Mount V0 panels with magnets, removes need for hinges and lets you easily detach sides for access

Download all (.zip), 251 kBView source on GitHub
745 views34 downloadsupdated

Images

Files

STL models (4)

STL models: Show or hide 4 files

Documents (1)

Documents: Show or hide 1 file

README

This mod comes in two parts, a fixed mounting plate which anchors to the v0 frame with m3x6 screws and a detachable front plate which holds the acrylic panel.

BOM:

Front Panel
  • 6 - M3x6 screws
  • 6 - M3 nuts
  • 22 - 6x3mm magnets
  • Printed parts
Side Panel (each)
  • 6 - M3x6 screws
  • 6 - M3 nuts
  • 28 - 6x3mm magnets

Assembly instructions:

Front panel
  1. Remove 2 front feet from V0.
  2. Preload 3 M3 nuts to each front extrusion.
  3. Attach mounting plate to front of V0 with M3x6 screws.
  4. Insert magnets into the 11 holes on the mounting plate.
  5. Using VHB tape, affix clear acrylic to the panel mount part.
  6. Insert magnets into the 11 holes on the panel mount. Be sure to match polarity properly!
  7. Re-attach 2 front feet to V0.
Side panels
  1. Remove 2 side feet from V0.
  2. Preload 3 M3 nuts to each side extrusion.
  3. Attach mounting plate to V0 with M3x6 screws.
  4. Insert magnets into the 14 holes on the mounting plate.
  5. Using VHB tape, affix clear acrylic to the panel mount part.
  6. Insert magnets into the 14 holes on the panel mount. Be sure to match polarity properly!
  7. Re-attach 2 side feet.

Related mods

  • V1 3Z

    by yeri

    3Z mod for V1
    • V1
    322 views16 downloads

  • Belt Tension Meter

    by Kruppes

    Print in place tension meter to easily tighten multiple belts to the same tension
    • V0
    • V1
    • V2
    • VSW
    9,343 views1,131 downloads

  • Cricut Voron Logos

    by GadgetAngel

    For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!
    • V0
    • V2
    • VSW
    • VT
    3,969 views683 downloads

  • HorseshoeSpoolHolder

    by LoganFraser

    Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.
    • V0
    • V1
    • V2
    • VT
    4,171 views258 downloads