This Clockwork module allows the use of the Orbiter v1.5 Extruder in the Voron Afterburner.
One of the main issues I observed when using the orbiter was a lack of a quick filament release in addition to a lack of a suitable clockwork adapter that would swap an orbiter directly into the Afterburner ecosystem. Many of the issues observed were addressed with this Clockwork Module. This version provides a chain anchor for the Voron 2.4 and the Switchwire, a Cable Cover, and a quick filament release lever.
|1||Orbiter v1.5 Extruder Orbiter Thingiverse link||Hardware|
|9||M3 Heat Set Inserts McMaster Link||Hardware|
|94180A331 or suitable inserts (Thread Pitch 0.5, Installed Length 3.8mm, Diameter ~5mm)|
|1||PTFE 45mm (Dragon)||Hardware|
|1||Clockwork Adaptor - Front||Printable|
|1||Clockwork Adaptor - Back||Printable|
|1||Filament Quick Release||Printable|
|1||Chain Anchor (Version for Voron 1.8/Trident/2.4 and Switchwire)||Printable|