V2.4

Voron2.4 Y Endstop Relocation

by hartk1213
Voron2.4 Y Endstop Relocation
This mod relocates the Y endstop to the top A drive piece
2023-07-07T14:31:22
580
GPL v3.0
CAD
Gantry
AB_Drive_Units
a_drive_frame_upper_with_endstop.step
a_drive_frame_upper_with_endstop_pinned.step
X_Axis
X_Carriage
MGN12Umblilcal.step
Images
1.png
2.png
3.png
4.png
README.md
STLs
Gantry
AB_Drive_Units
OLD(24r1)
a_drive_frame_upper_with_jst_y_endstop.stl
a_drive_frame_upper_with_jst_y_endstop.stl

This mod moves the Y endstop to the A drive, to go along with Arkeet's MGN12 mod that has the X endstop on the toolhead. This mod requires a 2 pin JST-XH to be soldered to the switch. The best way I have done it is to solder the wires to the JST-XH first, install it with a dab of super glue, then solder the wires to the Omron switch.

There are 2 different files

non pinned version

  • a_drive_frame_upper_with_jst_y_endstop.stl

pinned version (since this mod also works with the Voron2.4_Trident_Pins_Mod)

  • a_drive_frame_upper_with_jst_y_endstop_pinned.stl

here are a few pics for reference

A Drive

A Drive With JST

Jst with Wires

you might need to bend the pins a little bit to get them to fit around the curve

JST with bent pins

© 2023Voron Design.All rights reserved.