V2.4

Raspberry in plug panel

Tircown

Raspberry mount vertically in the plug panel, allow easy access to ports

License:

General Public License v3.0

Images

image0.jpg

image1.jpg

image2.jpg

.metadata.yml

plug_panel_raspberry_bracket.stl

plug_panel_with_raspberry_DD11.stl

plug_panel_with_raspberry_filtered_rocker.stl

plug_panel_with_raspberry_unfiltered.stl

readme.md

Select a file to view it.

Voron 2.4 Raspberry vertically installed in plug panel

For the DD11 version I used this reference: SCHURTER DD11.0113.1111 Many other versions of SHURTER DDXX plugs are compatible. Check out sizes on datasheet.

Instructions

Put three M3 threaded inserts in the back of the panel.
Install the pi on the bracket with three M2x10 self tapping screws.
Pass the USB cable(s) for inner components such as SKR before attaching the bracket to the panel. There is a notch on the side of the opening for the raspberry to that purpose.
Use three M3x8 to attach the bracket to the raspberry. The rest of the installation is pretty similar to the original bracket: check the official manual.

Other mods by Tircown

Display mount 5"

V0.1 Skirt buttons

DIN mount RS-15-5 PSU