V2.4

AB Plug (Microfit 1x4)

samwiseg0

Mod to mount A & B motor connectors to the gantry
    CAD
      v24_ab_microfit_1x4.step
      v24_ab_microfit_1x4_pme.step
    Images
      ab_microfit_1x4_non_pme.png
      ab_microfit_1x4_pme.png
    STLs
      ab_microfit_1x4
        [a]_ab_microfit_1x4_side_1.stl
        [a]_ab_microfit_1x4_side_2.stl
      ab_microfit_1x4_pme
        [a]_ab_microfit_1x4_pme_side_1.stl
        [a]_ab_microfit_1x4_pme_side_2.stl
    .metadata.yml
    README.md

Select a file to view it.

Voron 2.4 AB Plug (Microfit 1x4)

This mod is to add a plug to the gantry to connect the A & B motors. These mount on the underside of the rear extrusion facing the motors themselves. There are 2 different designs. One that supports a Microfit 3.0 1x4 with panel mount ears and the other is without panel mount ears.

Both these plug types have been found on the Lineo harneses. Check which one came with your harness before printing.

It may take some work to get the connector to fit.

Pro tip: If you would like the screws to be facing the rear of the printer you can mirror the model in your slicer.

Thanks to Rama#6392 for the orginal mods!

Printing

  • Default voron settings
  • No supports needed

BOM

SizeQty
M2x8 or M2x10 (Self Tapping Screws)4
M3x8 or M3x102
M3 T-Nut2
≤ 4"(10cm) Cable Zip Ties2

Microfit 3.0 1x4

Microfit 3.0 1x4

Microfit 3.0 1x4 with Panel Mount Ears

Microfit 3.0 1x4 with Panel Mount Ears

© 2024Voron Design.All rights reserved.