V2.4

Corner Cable Hide/Cover (LED Wires)

samwiseg0

Mod to hide cables around z idlers
    CAD
      [a]_top_corner_cable_hide_x4.step
    Images
      [a]_top_corner_cable_hide.png
      [a]_top_corner_cable_hide_back.png
      [a]_top_corner_cable_hide_inside.png
    STLs
      [a]_top_corner_cable_hide_left_x2.stl
      [a]_top_corner_cable_hide_right_x2.stl
    .metadata.yml
    README.md

Select a file to view it.

Top Corner Cable Hide/Cover (LED Wires)

Designed to hide cables that are running around the top corners of 2.4 extrusions behind the z idlers.

They are large enough to fit 3 pin microfit connectors.

There maybe some small loss in z. Don't forget to check your clearances after installing.

Pro tip: It may take some fiddling to get the wires to fit. You will know they are in place when it sits flush to the extrusions without wobbling. Also disable 'Thin Walls/Detect Thin walls' so the mounting ears print cleanly.

Printing

  • Default voron settings
  • No supports needed

BOM

SizeQty
M3x88
M3 T-Nut8

Top Corner Cable Hides

Top Corner Cable Hides

Top Corner Cable Hides

© 2024Voron Design.All rights reserved.