V0

V0 C920 Tophat Mount

Koios

Mounting bracket for a Logitech C920 on the tophat
    Images
      Cable_Routing.jpg
      From_Above.jpg
      Mount.jpg
    STEPs
      Cable_Clip_Tophat_Corner_x2.STEP
      Cable_Clip_Tophat_x2.STEP
      v0_920_mount.STEP
    STLs
      Cable_Clip_Tophat_Corner_x2.STL
      Cable_Clip_Tophat_x2.STL
      V0_C920_Mount.STL
    .metadata.yml
    README.md

Select a file to view it.

V0 C920 Mount

This is a low profile mount to hold a Logitech C920 series camera at the top front of the tophat, sharing the existing screw mount for the panel clips. I've also included some cable tie brackets to facilitate cable management for the usb cable. The mid-span clips are somewhat fragile, but if you use care they work well, as they aren't under any stress.

You will need to disassemble the C920, you can follow this video guide. Disassemble until you can get the two metal swivel joints undone, slide into the two holes on the mount, then reassemble.

This is how the finished project looks: Cable Route From Above Front view of the mount

Note: this will not work with the sherpa & extended top hat per goopyplastic V0.263

Other mods by Koios
© 2025Voron Design.All rights reserved.