Legacy area
- V2.1
- V2.2
Mini12864 Display Mount
by Iakabos
v1 · source 8e5067f · 12 files
Case and mounting arms for a Fysetc Mini12864 display
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (10)
STL models: Show or hide 10 files
- Back.stlSTL140 kBDownload
- Case_arm(Mirror).stlSTL257 kBDownload
- Case_arm.stlSTL251 kBDownload
- Front.stlSTL199 kBDownload
- Mount_block(Mirror).stlSTL116 kBDownload
- Mount_block.stlSTL116 kBDownload
- Swingarm_long(Mirror).stlSTL138 kBDownload
- Swingarm_long.stlSTL138 kBDownload
- Swingarm_short(Mirror).stlSTL97 kBDownload
- Swingarm_short.stlSTL97 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD443 BDownload
Images (1)
Images: Show or hide 1 file
- Display_mount.pngPNG669 kBDownload
README
This case for a Fysetc Mini12864 uses all standard hardware from a Voron V2 so you shouldn't need to order any extra parts. The "Case Arms" must be attached to the case back with button head screws (M3x8 BHCS) due to clearance. The "Mount Blocks" attach to the extrusion with M5x12 BHCS (cap head should work fine as well). All other screws are intended to be socket head M3 but are non-critical
Related mods
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,187 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,919 views1,138 downloads