Skip to content
Voron Mods
Menu
  • V0.2

V0 beltchains

by Iakabos

v1 · source 8e5067f · 8 files

Modified beltchain parts for V0 Z cables

Download all (.zip), 975 kBView source on GitHub
376 views25 downloadsupdated

Images

Files

STL models (7)

STL models: Show or hide 7 files
  • Mod_Beltchain0_Anchor_Closed.stl
    Mod_Beltchain0_Anchor_Closed.stlSTL339 kBDownload
  • Mod_Beltchain0_Anchor_Open.stl
    Mod_Beltchain0_Anchor_Open.stlSTL524 kBDownload
  • Mod_Beltchain0_Link_Slotted.stl
    Mod_Beltchain0_Link_Slotted.stlSTL62 kBDownload
  • Stock_Beltchain0_Adapter.stl
    Stock_Beltchain0_Adapter.stlSTL512 kBDownload
  • Stock_Beltchain0_Bottom.stl
    Stock_Beltchain0_Bottom.stlSTL435 kBDownload
  • Stock_Beltchain0_Link.stl
    Stock_Beltchain0_Link.stlSTL132 kBDownload
  • Stock_Beltchain0_Top.stl
    Stock_Beltchain0_Top.stlSTL586 kBDownload

Documents (1)

Documents: Show or hide 1 file

README

These files are for printed replacement chains for the z-axis on V0 printers. The original "stock" parts were created by Tinpec and included here for convenience.

The modified "anchor" pieces replace both the original "top" and "adapter pieces. You only need one anchor piece; there are two slightly different versions, with one having more clearance for bulky wires and the other being a little more polished.

The "link_slotted" piece is intended to replace some of the original links towards the lower end of the chain where it will not move. They slot into the 1515 extrusions.

In summary, for a stock build size you will need one "stock_bottom", 18 "links" (with up to 8 being the "slotted" variant), and one top anchor (this can be "anchor_closed", "anchor_open", or both of "top" and "adapter" To assemble this chain you will also need a small length of 6mm 2GT belt and some 1.75mm filament to capture the belt in the end links. The belt you use for this can be of any quality.

Related mods

  • c920 Mount

    by Iakabos

    Slim mount for logitech c920 webcam
    • V1
    • V2
    1,584 views237 downloads

  • Belt Tension Meter

    by Kruppes

    Print in place tension meter to easily tighten multiple belts to the same tension
    • V0
    • V1
    • V2
    • VSW
    9,343 views1,131 downloads

  • Cricut Voron Logos

    by GadgetAngel

    For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!
    • V0
    • V2
    • VSW
    • VT
    3,969 views683 downloads