Skip to content
Voron Mods
Menu
Legacy area
  • V1.6
  • V2.1
  • V2.2

Mini 12864 Voron Knob

by JaredC01

v1 · source 8e5067f · 4 files

Upgraded knob for Fystec Mini 12864 RGB LED Display

Download all (.zip), 6.2 MBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (1)

STL models: Show or hide 1 file
  • Mini_12864_Knob_Full.stl
    Mini_12864_Knob_Full.stlSTL3.9 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (2)

Images: Show or hide 2 files

README

Mini 12864 LCD Voron Knob

Images

Image Image

This is a replacement knob designed for the Mini 12864 Display with RGB LEDs (Fystec). The knob is designed to be printed in PLA and does not account for any shrinkage when printing with ABS, and may damage the knob if printed in ABS! YOU HAVE BEEN WARNED!

The first 3.0mm of the knob is the Voron logo portion, and can be printed in a different color to make it stand out (as shown above). Best bet is to use the same permiter and infill settings as functional parts for best light diffusion if using clear PLA.

Instructions

Clear Dual Color PLA
  1. In your slicer of choice, set a filament change after the first 3.0mm.
  2. After the first 3.0mm (starting at 3.2mm when using 0.2mm LH), switch from color PLA to clear PLA and continue printing. For best results, purge any remaining color filament when switching to clear.
Single-color PLA
  1. Load up the STL and print like any other part.

Related mods