Keystone Power Panel
by JaredC01
Power Panel with 1 or 2 Keystone Jacks
Legacy area
- V2
0 views0 downloads
Legacy area
- V1.6
- V2.1
- V2.2
Mosfet Mounts
by JaredC01
v1 · source 8e5067f · 5 files
Mosfet Mount for 4 or 6 Mosfets
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (2)
Documents (1)
Documents: Show or hide 1 file
- readme.mdMD586 BDownload
README
Mosfet Board Mount
Images
This is a mosfet mount panel for 4 or 6 mosfets. The mosfets this was designed for are located here: https://www.amazon.com/dp/B07F7SV84V Any of the similar mosfets should also work. The design is set to use self-tapping plastic screws, which you should have leftover from the build.
Instructions
- In your slicer of choice, insert the 4 or 6 mosfet mount STL, and print with the standard Voron print settings. Ensure the orientation is the same as the picture above, and keep supports turned OFF.
Related mods
Mini 12864 Voron Knob
by JaredC01
Upgraded knob for Fystec Mini 12864 RGB LED DisplayLegacy area- V1
- V2
0 views0 downloads
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,189 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,922 views1,138 downloads