Cable Tie Mount

v1 · source 8e5067f · 6 files

Cable tie mounts for 4mm cable ties

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

Show or hide 2 files

Show or hide 3 files

Show or hide 1 file

Design for 4mm cable ties. M3 mounting hole, but also has an M4 variant if you'd like some attached to the PSU mounting holes.

Small enough to attach to the bottom extrusions under the coroplast floor. Quick to print, using minimal material.

2020 Extrusion slot cover
by JeJeff
Slot covers for extrusions with 5mm slot width
Legacy area
- V1
- V2
0 views0 downloads
Main Plug Panel
by JeJeff
Main Plug Panel modified to hold a RJ45 ethernet socket
Legacy area
- V1
- V2
0 views0 downloads
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles
- V2
Jan 8, 202414,189 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension
- V0
- V1
- V2
- VSW
Jan 8, 20249,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.
- V2
Jan 8, 202412,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins
- V2
- VT
Jan 8, 202412,922 views1,138 downloads