Skip to content
Voron Mods
Menu
Legacy area
  • V1.6
  • V2.1
  • V2.2

Main Plug Panel

by JeJeff

v1 · source 8e5067f · 6 files

Main Plug Panel modified to hold a RJ45 ethernet socket

Download all (.zip), 906 kBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (2)

STL models: Show or hide 2 files
  • mains_plug_panel_with_rj45_panel_mount.stl
    mains_plug_panel_with_rj45_panel_mount.stlSTL395 kBDownload
  • mains_plug_panel_with_rj45_panel_mount_alternative.stl
    mains_plug_panel_with_rj45_panel_mount_alternative.stlSTL372 kBDownload

CAD files (3)

CAD files: Show or hide 3 files
  • Mains_Plug_Panel_with_RJ45_Panel_Mount.f3dF3D308 kBDownload
  • mains_plug_panel_with_rj45_panel_mount.stepSTEP1.1 MBDownload
  • mains_plug_panel_with_rj45_panel_mount_alternative.stepSTEP180 kBDownload

Documents (1)

Documents: Show or hide 1 file

README

Mains Plug Panel with RJ45

Add wired ethernet to your build by using this modified mains plug panel and a panel mount ethernet socket, such as this example from Aliexpress (27mm between centres for the M3 mounting holes).

Note that depending on where the Pi is mounted in the bottom compartment a 30cm cable on the panel mount can be too short, so I'd recommend a 60cm panel mount.

Two variants are available, one with the ethernet socket on the left, and one on the right.

Related mods