Skip to content
Voron Mods
Menu
Legacy area
  • V1.6
  • V2.1
  • V2.2

Duet Fan Mount

by synfinatic

v1 · source 8e5067f · 6 files

Duet/Duex fan mount with air vents directly above the steppers to increase airflow

Download all (.zip), 366 kBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (4)

STL models: Show or hide 4 files

CAD files (1)

CAD files: Show or hide 1 file

Documents (1)

Documents: Show or hide 1 file

README

Duet/Duex Fan Mount

Overview

If you want fans to cool the steppers on your Duet or Duex2/5 then you'll want these optional mounts. They're a bit stronger then the default Voron mounts and allow easy repositioning of the brackets without having to use additional standoffs.

Please note that these files require your slicer settings to be able to perform basic bridging. No supports are required. You must print at 0.2mm layer hight so that the single layer bridge for the duet screw mounts is printed correctly.

Requirements

Printed Parts:

  • 1x each of the included brackets printed at 0.2mm layer height

Hardware:

  • 2x 40x40mm fans. Either 10mm or 20mm fans will do
  • 8x M3 bolts which are 5mm longer then your fans are deep
  • 4x M5x8mm bolts

Related mods

  • E-Stop Switch

    by synfinatic

    Mount for emergency button attached to the top of the printer
    Legacy area
    • V2
    0 views0 downloads

  • RJ45 Mount

    by synfinatic

    Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient
    Legacy area
    0 views0 downloads

  • Angry CAM USB

    by chri.kai.in

    Housing for small USB camera module, allowing mounting to gantry or frame profiles
    • V2
    14,189 views1,218 downloads