Skip to content
Voron Mods
Menu
Legacy area

PS Extra Bracket

by synfinatic

v1 · source 8e5067f · 3 files

Extra bracket to keep the power supply in place

Download all (.zip), 109 kBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (1)

STL models: Show or hide 1 file

CAD files (1)

CAD files: Show or hide 1 file

Documents (1)

Documents: Show or hide 1 file

README

Power Supply Extra Bracket

Overview

By default, the Voron2 uses two brackets to mount the 200W 24V power supply to the extrusions. This works very well if you mount it to both extrusions holding your bed, but if your extrusions are mounted too far apart, then you'll need an extra bracket so that power supply doesn't sag & pivot.

Requirements
  • 1x PS bracket
  • 1x M5x8mm button head
  • 1x M4x6mm button head

Related mods

  • Duet Fan Mount

    by synfinatic

    Duet/Duex fan mount with air vents directly above the steppers to increase airflow
    Legacy area
    • V1
    • V2
    0 views0 downloads

  • E-Stop Switch

    by synfinatic

    Mount for emergency button attached to the top of the printer
    Legacy area
    • V2
    0 views0 downloads

  • RJ45 Mount

    by synfinatic

    Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient
    Legacy area
    0 views0 downloads