V2.4

Microfit 2x3 Skirt Connector (ADXL)

by samwiseg0
Microfit 2x3 Skirt Connector (ADXL)
Mod for a Microfit 2x3 connector to be mounted in a skirt
2022-02-01T15:49:25
826
GPL v3.0
CAD
microfit_2x3_skirt_connector_adxl.step
Images
[a]_microfit_2x3_skirt_connector_adxl.png
[a]_microfit_2x3_skirt_connector_adxl_skirt.png
[a]_microfit_2x3_skirt_connector_adxl_whole.png
README.md
STLs
[a]_microfit_2x3_skirt_connector_adxl_base.stl
microfit_2x3_skirt_connector_adxl_lock.stl

Microfit 2x3 Skirt Connector (ADXL)

Mod for a Microfit 2x3 connector to be mounted in the bestagons. Typically used for ADXL but can be used as a general connector for anything outside the printer.

Pro tip: I found that adding some hot-glue while installing it into the skirt makes it a bit more robust for unplugging and plugging in.

This is originally based off of this mod. It was modified to not require supports and have a bit tighter fit onto the connector.

Printing

  • Default voron settings
  • No supports needed

BOM

SizeQty
Microfit 04302006081
Microfit 04302506001

Microfit 2x3 Skirt Connector (ADXL)

Microfit 2x3 Skirt Connector (ADXL)

Microfit 2x3 Skirt Connector (ADXL)

© 2023Voron Design.All rights reserved.