Skip to content
Voron Mods
Menu
  • V2.4

Display mount 5"

by Tircown

v1 · source 8e5067f · 18 files

Tiltable mount for a 5" tactile display

Download all (.zip), 6 MBView source on GitHub
2,271 views224 downloadsupdated

Images

Files

STL models (13)

STL models: Show or hide 13 files
  • display5inch_arm_a.stl
    display5inch_arm_a.stlSTL295 kBDownload
  • display5inch_arm_b.stl
    display5inch_arm_b.stlSTL295 kBDownload
  • display5inch_case.stl
    display5inch_case.stlSTL1.1 MBDownload
  • display5inch_case_moretolerance.stl
    display5inch_case_moretolerance.stlSTL1.1 MBDownload
  • display5inch_front_rear_skirt_a_250.stl
    display5inch_front_rear_skirt_a_250.stlSTL678 kBDownload
  • display5inch_front_rear_skirt_a_300.stl
    display5inch_front_rear_skirt_a_300.stlSTL702 kBDownload
  • display5inch_front_rear_skirt_a_350.stl
    display5inch_front_rear_skirt_a_350.stlSTL737 kBDownload
  • display5inch_front_rear_skirt_b_250.stl
    display5inch_front_rear_skirt_b_250.stlSTL678 kBDownload
  • display5inch_front_rear_skirt_b_300.stl
    display5inch_front_rear_skirt_b_300.stlSTL702 kBDownload
  • display5inch_front_rear_skirt_b_350.stl
    display5inch_front_rear_skirt_b_350.stlSTL737 kBDownload
  • display5inch_optional_microsd_holder.stl
    display5inch_optional_microsd_holder.stlSTL184 kBDownload
  • display5inch_optional_sd_holder.stl
    display5inch_optional_sd_holder.stlSTL163 kBDownload
  • display5inch_slide_x2.stl
    display5inch_slide_x2.stlSTL54 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (4)

Images: Show or hide 4 files

README

Voron 2.4 5" display tilting support

Many thanks to Jo_Thingiverse for having tested this mount.

Bill Of Materials
  • Screen 5" 800*480 IPS TFT MIPI DSI Multi-Touch Capacitive Touch Panel LCD Module Display Monitor Screen for Raspberry Pi
  • optional SD extender or microSD extender
  • 2 M3x15
  • 6(+4) M3x8
  • 6 M3 threaded inserts
  • 2 M3 hammered nuts
Instructions
  1. Put one M3 threaded insert in each arm end.
  2. Put four M3 threaded insert in the back of the screen case.
  3. Remove the built-in support in the fork of both arms.
  4. Install the two slides with M3x8.
  5. Use two pieces of filament as hinges.
  6. Adjust the tension of the screws that pass through the slides to keep the position.
  7. The optional installation of the SD extender requires four self tapping M3x8.

Since the screen is larger than the original piece you will have to replace your sides skirts. These are included too.

CAD photo1 photo2 photo3

Related mods