Skip to content
Voron Mods
Menu
  • V2.4

Raspberry in plug panel

by Tircown

v1 · source 8e5067f · 8 files

Raspberry mount vertically in the plug panel, allow easy access to ports

Download all (.zip), 7.9 MBView source on GitHub
262 views13 downloadsupdated

Images

Files

STL models (4)

STL models: Show or hide 4 files
  • plug_panel_raspberry_bracket.stl
    plug_panel_raspberry_bracket.stlSTL1.6 MBDownload
  • plug_panel_with_raspberry_DD11.stl
    plug_panel_with_raspberry_DD11.stlSTL882 kBDownload
  • plug_panel_with_raspberry_filtered_rocker.stl
    plug_panel_with_raspberry_filtered_rocker.stlSTL881 kBDownload
  • plug_panel_with_raspberry_unfiltered.stl
    plug_panel_with_raspberry_unfiltered.stlSTL837 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (3)

Images: Show or hide 3 files

README

Voron 2.4 Raspberry vertically installed in plug panel

For the DD11 version I used this reference: SCHURTER DD11.0113.1111 Many other versions of SHURTER DDXX plugs are compatible. Check out sizes on datasheet.

Instructions
  1. Put three M3 threaded inserts in the back of the panel.
  2. Install the pi on the bracket with three M2x10 self tapping screws.
  3. Pass the USB cable(s) for inner components such as SKR before attaching the bracket to the panel. There is a notch on the side of the opening for the raspberry to that purpose.
  4. Use three M3x8 to attach the bracket to the raspberry. The rest of the installation is pretty similar to the original bracket: check the official manual.

photo1 photo2 photo3

Related mods