Flip the Trident electronics bay for top access.

This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins

Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles

Voron Exhaust Filter Inserts for Activated Coal + Hepa

Microswitch based inductive probe replacement

This mod replaces stock V2 Z endstop with a different style

Wago Mounts for Din Rail or 2020 Extrusion mounting.

This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend

Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft

Extrusion mount for a NTC100K Thermistor extrusion

Bowden tube guide and CANBUS wire support

Mounting Bracket for BTT Manta M8P

For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!

Magnetic panel mounts with magnets inserted into frame slots.

Internal spool holder for 300 and 350 Tridents. Supports full size 1kg spool

Exhaust housing with dual cover screws and single or dual side entry filament paths.

Bed fans for Trident

Modular LED Clip for mounting LED Strip to 2020 Extrusions

Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.

Stealthburner mod for Rapido UHF

Bigtreetech U2C CAN Interface mounting bracket

Mod to cover the screw terminals for several LRS style PSUs

Spool holder that mounts on top for "too close to the wall" printers

PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident