Housing for small USB camera module, allowing mounting to gantry or frame profiles

Flip the Trident electronics bay for top access.

This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins

Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles

Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire.

For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!

Modified v2.2 handles with no panel rest and with 4 anchor points

New hinge to easily remove the door and have a wide opening V2.x

Voron Exhaust Filter Inserts for Activated Coal + Hepa

Microswitch based inductive probe replacement

Hinges that have 270° of swivel, parametric CAD included

Mounting Bracket for BTT Manta M8P

Spool holder that mounts on top for "too close to the wall" printers

Voron 2.4 Pull-out electrical store（350mm only）

Voron0 nut inserts which auto-align (LDO frames only)

The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.

Internal spool holder for 300 and 350 Tridents. Supports full size 1kg spool

Simple 270 degree hinges that clamp to the front panels instead of using VHB or drilled holes

Bigtreetech U2C CAN Interface mounting bracket

This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend

Magnetic panel mounts with magnets inserted into frame slots.

MGN12 Dual 5015 Toolhead for 2.4 & 1.8

Convesion of an Ender 3 Pro or V2 to a Switchwire

v2.4 magnetic clips to retain bottom panel