Quick release panel latch inspired by the work of others.

Removeable purge bucket with nozzle scrubber

Microswitch based inductive probe replacement

MGN12 Dual 5015 Toolhead for 2.4 & 1.8

Print in place tension meter to easily tighten multiple belts to the same tension

For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!

Housing for small USB camera module, allowing mounting to gantry or frame profiles

New hinge to easily remove the door and have a wide opening V2.x

Zip tie mount intergrated cable duct to hide your cable

Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles

Spool holder that mounts on top for "too close to the wall" printers

Z belt covers that allow hidden cable routing.

Cover for exhaust cutout in back panel

This mod replaces the stack of printed z joints with a metal spherical bearing

This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins

Bed fan control macros and 5015 bed fan mounts

Handle for Voron 2.4

Clips to help support lower deck panels to prevent (or fix) warping:

Hinges that have 270° of swivel, parametric CAD included

Rear Umbilical mounting solution including a relocated Y-Endstop

Bowden tube guide and CANBUS wire support

Bigtreetech U2C CAN Interface mounting bracket

Mod to hide cables around z idlers

Rockers to roll the printer on its back for easier access to the electronics compartment